Responses (1)

C

Caitlyn_Ring

Hi @jschmid. You should be able to find the appropriate wiring diagram to setup one Doorbell Pro with two internal chime kits in our Help Center Article [here](https://support.ring.com/hc/en-us/articles/360022454432-Wiring-Diagrams-for-Ring-Video-Doorbell-Pro-Setup). I hope this helps! :)

0

•

20-10-2020 20:35:07

•

Reply

J

jschmid

Caitlyn\_Ring, THANKS!! Just to confirm, the image below is for One Ring Pro and 2 Chimes, correct? John

0

•

21-10-2020 02:30:13

J

jschmid

Caitlyn\_Ring, I checked my home wiring and it doesn't match any of the ones listed (see attached). Unfortunately I don't have wires between each chime to wire from Chime to chime. Any thoughts on how I should wire the Ring Pro? Thanks, John

0

•

21-10-2020 04:34:00

C

Caitlyn_Ring

@jschmid Yes, that is the correct diagram. For any wiring questions that are specific to your home's layout, you may want to reach out to a licensed electrician. You can contact our support team directly as well, but they might direct you to an electrician for more detailed wiring assistance. You can give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). We’re taking additional steps to protect our team and help reduce the spread of COVID-19, so this has resulted in longer than normal wait times. If you are outside of the US, please read our response to COVID-19 [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support.

0

•

21-10-2020 16:36:37