Responses (2)

J
Justin_Ring
Hi @Betty_Forgetty. If you have enabled Motion Warning and it does not work, try the following steps: - Verify your Camera is on the [list of devices that support Motion Warning](https://support.ring.com/hc/en-us/articles/360048674751-Motion-Warning-Information). - [Reboot your Camera using the Ring app](https://support.ring.com/hc/en-us/articles/7438395032980-How-to-Reboot-your-Ring-Doorbell-or-Security-Camera-from-the-Ring-App-). - Power cycle your Camera by turning it off for a minute and then turning it back on. If you have tried these steps and are still having the same concern, give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406) for further assistance. If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.
0
•
25-01-2023 16:22:23
•
Reply
U
user_eb5434
My Ring indoor cam 2nd Gen lost the motion warning feature and a camera hard reset appeared to fix it. A hard reset is press and hold the top button for 60 seconds (no less) before you let go. Allow it to reboot to a slow flashing blue LED. Go to device help in the ring APP>device health>change network and re-enter your wifi credentials if needed. Go to the ring app and review the motion warning status and verify it is ON. Then go to motion settings>smart alerts, and set the alert types as desired. FYI....I found that if I didn't have vehicle alert enabled, the camera would not always activate the motion alert from my body motion when I walked around my car. I set person, vehicle, and other motion to ON and the motion alert is always activated with motion detection. You can test this in your environment to verify things are working as you expect.
0
•
12-02-2025 19:43:27
•
Reply