Responses (1)

C

Caitlyn_Ring

Hi @Johnnyma45. The ring on the top of the Base Station will display the mode status, as it will be blue when the system is disarmed and red when it is armed. As for the lights on the Keypad, you can check out our Help Center Article [here](https://support.ring.com/hc/en-us/articles/360042894911-Ring-Alarm-Keypad-2nd-gen-Lights-and-Buttons-Explained) to learn more about the 2nd gen Keypad. If you have the 1st gen Keypad, you'll want to look at [this](https://support.ring.com/hc/en-us/articles/360037666912-Ring-Alarm-Keypad-1st-gen-Lights-and-Buttons-Explained) Help Center Article to learn more about the lights and what they indicate. I hope that's helpful! :)

0

•

21-10-2020 15:58:08

•

Reply

J

Johnnyma45

So I take it to mean there is no option for the keypad to be always-on for alarm mode display? I wouldn't mind charging the keypad more often if it meant I could have it always on, and I could see it from across the room.

0

•

26-10-2020 13:55:35

T

Tom_Ring

Hi @Johnnyma45. Chiming in for Caitlyn here. There is no way for the Keypad to be constantly illuminated. The only ways the Keypad to light up are the methods outlined in the articles above.

0

•

28-10-2020 17:10:05