Responses (6)

T

Tom_Ring

Hi @JARW. It sounds like you've covered most of the basic steps I typically suggest. One thing you can try, would be to connect your camera to a wifi hotspot. Once you are online with the wifi hotspot, go into the Device Health section of the Ring app and select Change my WiFi network. If you are asked to join a previous network, select NO and enter all of your wifi information in manually. Let me know if this works!

1

•

14-07-2021 22:04:22

•

Reply

B

blouse

Ring needs to FIX their FIRMWARE so that these disconnects don't happen after a simple WiFi outage! This has been asked for time and time and time again, for YEARS Reconnect to WiFi should be handled automatically, immediately when the WiFi becomes available again, and not require the owner to be physically present!

8

•

25-02-2022 17:41:33

P

pworthington

@blouse! Yes! Cannot reestablish connection to stick cam, and I am 450 miles away from it. Neighbor on-site trying to help, but seems like I need to be physically near the cam to reconnect via WiFi. Oy.

2

•

25-02-2022 20:49:02

N

NJM

This is a known common issue with ring. Unless you physically push the orange button it will not reconnect. Calling your "support" team results in them reading a script to you of things we already did. Telling it that you changed the network does not work as the light has to be spinning. It requires manual intervention. There is a problem with the product. I have two wired cameras. One has the issue, the other does not. Swapping the two cameras, the problem goes with the camera.

1

•

17-07-2022 13:31:56

T

Tom_Ring

Hi @NJM. What is the RSSI for your devices? If your cameras don't automatically reconnect, you may have a low RSSI, or the security settings on your network can also be prohibiting the camera from rejoining. I recently upgraded to the Ring Alarm Pro with the built in Eero 6 and now all of my devices have an RSSI of -37 or better. Prior to this, my RSSI was around -68 and I would have difficulty getting this camera back online after an outage. Try bringing a camera in the same room as your router, then reboot your router and give the camera about 10 minutes to rejoin the network. Let me know how this goes for you.

1

•

19-07-2022 22:25:22

F

FireMist

or, in my case 3 of the 5 cameras came back online themselves. one came back on a second try on the phone to reconnect. The 5th seems dead. We had a power outage, not a surge since I have the power records here in front of me. But the camera seems dead and unable to power on. The power cord does work with another camera so it is the camera, not the power supply. Are they really that fragile?

1

•

07-03-2022 18:55:56

•

Reply

C

Caitlyn_Ring

Hi @FireMist. If one of your Cameras is unresponsive and the power cord works with another Camera, I would recommend following up with our support team so they can look into this further. They'll walk you through all applicable troubleshooting steps and determine if a replacement is needed under the device's [warranty](https://ring.com/warranty). You can give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.

0

•

07-03-2022 23:43:26

U

User223344

I have a floodlight cam wired pro. It fails to reconnect to the wifi network after any minor power cut. To add insult to injury, it then flashes the spotlight continuously until it is powered of. This is a massive bug that urgently needs to be rectified. My wifi is less than 2 feet away from the floodlight. When I am 3000 miles away, having to physically reset the security device is nonsense. The whole point is to be able to rely on a security device when you are not at home. My neighbours love me at the moment, 48 hours of flashing floodlights in their window. Not impressed. Please formally respond to this Ring.

1

•

31-07-2022 08:21:47

•

Reply

C

Caitlyn_Ring

Hi @User223344. The Ring Community is a public, peer-to-peer forum where neighbors can interact with each other and share troubleshooting tips. Members of our Community team will provide general assistance as well, but more advanced concerns may require our [support team](https://support.ring.com/hc/en-us/articles/213608406). If your Floodlight Cam isn't reconnecting to wifi automatically after a power or wifi outage, it may not have a stable connection to your wifi. Try checking the [RSSI](https://community.ring.com/t/how-it-works-your-ring-device-rssi-good-vs-poor/229#M4) on the Device Health screen. The wifi access point closest to your Floodlight Cam may need to be repositioned, as wifi signals don't always travel well through different building materials or if other electronics nearby are causing interference. I hope these suggestions are helpful! If you need further assistance, our support team can take a deeper dive. :)

0

•

01-08-2022 20:41:06

C
Caitlyn_Ring
0
•
08-09-2022 22:38:51
•
Reply
C
Caitlyn_Ring
0
•
08-09-2022 22:39:00
•
Reply