Responses (2)

K
KGreen0923
Only do this if you have another router set up as well. I tried this and had to reset and reconfigure my router just to get my internet to work again.
1
•
10-06-2020 02:50:59
•
Reply
U
user_7647e9
Problem:
I have an Amplifi Router HD and a Ring Doorbell Pro 2 and had a similar issue.  After functioning well for months, it dropped off the network.  When I attempted to reconnect, the doorbell would not auto-connect to the Amplifi router.  I then attempted to manually connect, but the Ring SSID that the app told me to connect to with my iPhone did not display in the Wi-Fi settings.  
Solution:
I setup a separate 2.4 SSID on the Amplifi router and ran the setup again, and the doorbell auto connected to the 5GHz network on the first try.
Note:
I did contact Ring support (XXXXXXXXXX and they said their cameras do not work reliably on mesh networks.   
Amplifi:
As brianjsanders stated in his post, if you do put the Amplifi in bridge mode, you will most likely have issues with reconnecting any device to the network.  I tried it just to see what the result would be and it led to me needing to reset the Amplifi router.  Simple to do but make sure you have your current SSID name and password before you reset or you may end up reconnecting all wi-fi devices.  You may also need to reconfigure all static IP addresses as the Amplifi may change it's local IP address.  Mine changed from XX.XX.XX.XX, to XX.XX.XX.XX.
Hope this helps someone.
0
•
11-01-2025 14:49:55
•
Reply