Ring Security Cameras
Browse posts, comment, and join in the discussion about Ring’s indoor and outdoor cameras.
Browse posts, comment, and join in the discussion about Ring’s indoor and outdoor cameras.
Hi all, I have two Outdoor Camera 4K Pro units and both behave the same way: they only detect motion caused by people. Anything else triggers no recording, no Event History entry and no notification. What I tested (reproducible on both cameras): - animals (e.g. birds) in the frame - cars driving past - a shovel held and moved clearly inside the frame - a hand held and moved inside the frame None of these are detected. As soon as a person walks into the frame, the cameras trigger reliably. All my previous Ring cameras recorded almost any motion: moving branches, birds, dogs, objects. The 4K Pro apparently records people only, at least the units I received. Setup and settings: - Firmware up to date, Premium plan - Same result with Smart Alerts off and on - Same result on mains power and on battery power - Motion zones checked: happens with the default zones and with a zone covering the entire frame - Motion sensitivity at maximum for all tests Already tried, no change: - power cycle - removing the camera and setting it up again from scratch To be clear, this is not about classification. I simply want any motion in the frame to be detected and recorded, as with my older cameras. Questions: 1. Is anyone else seeing this with the Outdoor Camera 4K Pro? 2. Is this intended behaviour (e.g. because of 3D/radar motion detection), or a known firmware issue? 3. Is there a setting that makes the camera record all motion again? Thanks for any help.
7 •
1 •
0 •
16-11-2026 20:41:17
No Responses Found
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates