Responses (3)

C
Caitlyn_Ring
Hi @DaveAsh. Plug the Doorbell's battery in to charge for at least 8 hours using the provided charging cable. Make sure it's plugged into a standard power outlet as well. Then attempt to reset the Doorbell by holding down the setup button for at least 20 seconds. If the Doorbell is unresponsive after the reset, please follow up with our [support team](https://support.ring.com/hc/en-us/articles/360036196372-Contact-Us) for further assistance. If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.
0
•
29-11-2023 21:49:54
•
Reply
U

user_704dfd

After searching all over the internet for at least a year and starting to believe all of the conspiracy theories that Ring had intentionally caused the problem with directives in their auto firmware updates, I have finally discovered that the problem is a hardware problem.  A spring loaded contact post on the panel board has weakened and is not coming in contact with the power supply feeds from your hardwiring.  It takes a little DIY capability but it can be easily fixed if you have a soldering iron and can turn screws.  See this post on REDDIT that was 2 years old. 

https://www.reddit.com/r/Ring/comments/vke9ym/ring_doorbell_2_hardwired_but_shows_battery_solved/

I guess I just never searched google with the exact string of words necessary to find the post, as I've been searching for a long time.  I did as he directed and my problem was fixed!  My battery is now charging from the hardwiring, the app shows I am hardwired, and my existing doorbell inside my home is ringing again.  Kuddos to my savior on Reddit!  Please pass the word in your circles!

0

•

25-07-2024 22:03:00

•

Reply

U

user_ab9c97

I can confirm that this fix works. I’ve just done it with mine and at last my app reports as hardwired again. For some reason the contact points must have been only just connecting (bad design in my opinion) and over time have separated (maybe due to temperature swings?). Anywa, a blob of solder on the brass connector and voila, problem solved.

0

•

04-08-2024 09:33:05

R

RearAdmiral

I can also confirm that this fix works. Not only was my battery not charging, but my wired doorbell was not ringing either. This fixed both of the issues.

0

•

24-04-2025 19:28:57

U
user_345b60
Mine too . Took off of house put inside . On charger for almost 5 hours , nothing . This is the second ring I had and may be the last . Only 2 years old . 
0
•
24-01-2026 23:54:39
•
Reply