Responses (1)

B

Boone

> @Torofrans wrote: > > I intend to buy a Stick-up Cam wired to install it outdoors. I need to know the length of the power cable, which is supplied with the camera. Cannot find this info on the internet. Please help me. @Torofrans , I too could not find the **lengths for** the **Plug-in Stick-up** cameras online. Luckily, I own several of these cameras, and I measured. Because all are already mounted outside, I only have rough managements (unable to pull the cords taut without a big hassle to me). These rough measures are as a minimum, so you'll probably actually get about 6 inches more. There are **Two Cords** , and I realize my explanation might be difficult to understand, so I've attached two pictures. When the **two cords are combined together** , the length a little bit over **20 feet total**. The **First cord is** a bit over **6 feet long**. It has a custom-fit jack that inserts into the back of the Stick-up cam. The other end of this cord has a small, weather-proof electrical transformer that accepts an adapter. This transformer already comes with the 2-bladed-power adapter clicked securely in place. The **Second cord** is a bit over **14 feet long**. It has an adapter that can connect into the 6-foot cord's transformer. The other end has a non-removable 2-bladed-power end. You have two options available for you: - If you do not need the additional 14-foot portion, you can just use the 6-foot cord, and keep the 2-bladed-adapter plug in place . - If you require more than 6-feet, firmly press on the "Push" button and slide the bladed-adapter off the transformer. Then slide on the 14-foot adapter until it clicks securely in place. This will take a bit of physical pressure, because there is an orange gasket on this adapter to provide a water-tight electrical connection. This adapter also has 4 holes for mounting screws to secure the transformer. So basically, have a 6-foot cord length, or the option to convert it into a 20-foot cord. I hope my explanation is not too confusing, and it is helpful to you. :)

5

•

26-08-2020 22:36:37

•

Reply

T

Torofrans

Thank you for your efforts

2

•

28-08-2020 09:04:12

B

Boone

> @Torofrans wrote: > > Thank you for your efforts @Torofrans , You are welcome. My pleasure! :)

0

•

28-08-2020 09:23:38

B

Boone

> @Torofrans , UPDATE CORRECTION: In my previous post in this tread on 08-26-2020, I tried to measure the length the cord length as best that I could, without pulling down the already-mounted cord. These previous rough measurements were as a minimum. I purchased another Stick-up camera, and I received it today. So, I re-measured the cords right out of the box. And I wanted to post the corrected, more accurate lengths of the cords. The **Two Cords** , when **attached/combined together** , the length is 22.9 feet total. - The **First cord is** a bit over **8 feet long** , (not 6' as previously posted). - The **Second cord** total length of **14.9 feet long.** Just the wire cord portion is 14.6 feet long, and the transformer **adapter part adds another 2"** to the length. You have two options available for you: - If you do not need the additional 14.9-foot portion, you can just use the 8-foot cord, and keep the 2-bladed-adapter plug in place . - If you require more than 8-feet, firmly press on the "Push" button and slide the bladed-adapter off the transformer. Then slide on the 14.9-foot adapter until it clicks securely in place. I hope this 'more accurate' measurement is helpful to you, or others. :)

2

•

02-09-2020 21:57:35

B

Boone

 

0

•

29-12-2020 19:22:24